Manual engraving machines is a kind of engraving machines that is not computerized. This is actually an engraving machine for those who like a conventional one. Manual engraving machines is suitable for someone who still starting an engraving business at home.
Manual Engraving Machines – PM-55CA
The PM-55CA manual engraving machines is a large size engraver used for engraving objects up to 12-1/2″ high by any length. This machine will accept high and large objects.
This manual engraving machines has 5″ centers vise depth. This universal work-holding vise allows the clamping and engraving of large trophy cups and mugs up to 9″ in diameter. The machine is fitted with a scissors jack that enables the operator to move the vise up and down, backward and forward, as well as tilting it.
Also this PM-55CA manual engraving machines has standard accessories that are:
• Multi-ratio pantograph, 21 ratios between 2:1 and 7:1
• Roller Bearings on Pantograph
• 1 Heavy Duty Induction Type Motor, no brushes, 40W, 110Volt A.C.
• 1 Vise, 12-1/2″ opening, self centering, 6″ depth, 5″ elevation system
• Scissors jack to raise vise, universal cup cone and back plate support
• Graduated Copy Table 6″ x 16″, Accessory Case with Tools
• 2 Copy Slides for 1″ type with end stops, 2 Motor Belts
• 3 Carbide cutters, .020, .030 and .040 tip size
• 1 Set of 1″ Block Style Master Type, 2 Polished Steel Nose Cones
• Micrometer Adjustment for Depth Regulator, 1 Nylon Nose Cone
• Motor Belt Tension with 2 idler pulleys, 50 nameplate blanks
• Tension Adjustment, 1 Tracing Stylus, Protective Cover and Instructional Video.
• Approximate Shipping Weight: 150 lbs
Manual Engraving Machines – PM-33
This PM-33 manual engraving machines is easy, quiet, elementary and simple to be operated. This is actually a reliable machine for industrial engraving with an unsurpassed track record for durability and lasting quality.
Moreover, this manual engraving machines is also the perfect machine for those who want to start their own engraving business at home with no previous experience necessary. This machine is suitable for engraving plastic and metal engraving materials. By changing the ratios you can get 21 different letter sizes from 1 set of type.
The standard accessories of this PM-33 manual engraving machines are:
• Multi-ratio pantograph, 21 ratios between 2:1 and 7:1
• Roller Bearings on Pantograph
• 1 Heavy Duty Induction Type Motor, no brushes, 40W, 110Volt A.C.
• 1 Vise, 7″ opening, self centering 360 degree rotation
• Graduated Copy Table 6″ x 16″, Accessory Case with Tools
• 2 Copy Slides for 1″ type with end stops, 2 Motor Belts
• 3 Carbide cutters, .020, .030 and .040 tip size
• 1 Set of 1″ Block Style Master Type, 2 Polished Steel Nose Cones
• Micrometer Adjustment for Depth Regulator, 1 Nylon Nose Cone
• Motor Belt Tension with 2 idler pulleys, 50 nameplate blanks
• Tension Adjustment, 1 Tracing Stylus, Protective Cover and Instructional Video
• Approximate Shipping Weight: 45 lbs
Manual engraving machines is simpler than the computerized one; so it is easier for the beginner to operate this machine, and of course, the price also less expensive.
Comments on this entry are closed.